It is supposed that:
The software phone has been already installed on your computer,
you already have any information necessary for connection of the telephone (see section 11.1 Information you need for connection of any software telephone).
Note
Tested on SJphone 1.60
Run the application and wait for the telephone to display on your screen.
Click on (see figure 11.3 Software telephone SJphone).
Menu with options is displayed. Click on Options.
On the Profiles tab click on . This opens the Create New Profile dialog where it is required to enter any profile name (you can use your username, for example). Save the profile.
This opens the Profile Options dialog. Go to the SIP Proxy tab and enter IP address or DNS name of the Kerio Operator PBX.
On the Initialization tab check options Account, Password and Caller ID (see figure 11.4 Profile Options → Initialization).
Dialog asking for authentication details and telephone extension gets opened automatically (see figure 11.5 Profile Options —). In entries Account and Password specify your username and the SIP password associated with the extension and in the Caller ID field enter the extension assigned by your network administrator.
